Product Description

Product Description

LCB Sequence Gear Pump for Transfer Pitch, BiHangZhou,asphalt

LCB type asphalt pump is rotary kind, mainly composed by the pump body, body, driving equipment and pushed gear and safety valve, etc. Driving shaft is supported by an additional oil bush, via oil cup included HG – 24 saturation cylinder lubrication oil. The two sides of the pump with belt cone thread link head so as to join to import a pipeline, the taper pin system has internal thread in purchase to eliminate. The seal paper pad is utilized to modify the equipment axial clearance, this gap by unidirectional in .05-.08 mm.

Working principal

When functioning, medium into suction cavity by way of the rotation of the equipment, the medium stress into The drain cavity and outflow. Modify the handwheel can modify the output circulation, when the appropriate hand From hand to hand wheel, the aid valve is prime open, pump that is lost output pressure and quit drainage
When the hand wheel rotation, the reduction valve is restoration effect, medium typical output.

Use:

Primarily used for pumping, transportation and spray substantial temperature of asphalt (residue) liquid, the Most suited for street and sq. design of asphalt (residue) spray perform, also can be in regular Temperature for suction, conveying the high risky, low flash level of petroleum products, this sort of as all Types of oil, equipment oil and large oil, and so on.

What is the function of the tapered bushing? Tapered bushings are typically used to mount pulleys, sprockets and pulleys on shafts. They are break up, have no flange bushings, use screws to hold the shaft, and give good clamping drive. Tapered bushings are frequently employed for recessed ceiling lights due to the fact they have an even mounting spacing and, if installed accurately, they are extremely successful in higher torque purposes.