Solution Description
Horizontal CZPT Duty Gap-mattress Lathe (Turning CZPT )
DL-one thousand
DL-1250
DL-1400
DL-1600
Functions:
These lathes can complete to flip conclude-faces, cylindrical surfaces and internal holes of CZPT elements as properly as metric, inch, module and pitch threads.
The leading slides can be operated separately by CZPT for chopping brief taper floor, also can be turned automatically by means of the compound motion combining CZPT itudinal feed with the prime slide feed, in addition, the machines could be employed for drilling, unexciting and trepaning.
The equipment instruments are attributes of CZPT , large spindle pace, large rigidity.
The CZPT ferrous and CZPT -ferrous metals elements may possibly be turned by way of the large reducing by carbon alloytools.
Complex Parameter:
| Specification | Device | DL-a thousand | DL-1250 | DL-1400 | DL-1600 |
| Capacity | |||||
| Max. swing diameter over bed | mm | 1040 | 1250 | 1440 | 1640 |
| Max. swing diameter more than cross slide | mm | 650 | 900 | 920 | 1030 |
| *Max. swing diameter in excess of gap | mm | 1400 | 1740 | 1890 | 2090 |
| Width of bed | mm | 755 | |||
| Max. duration of workpiece | mm | 1000/2000/3000/4000/5000/6000/7000/8000/9000/10000 | |||
| Spindle | |||||
| Spindle nose | – | A15 | |||
| Spindle bore diameter | mm | 130 | |||
| Spindle taper | – | Metric No.one hundred forty | |||
| Spindle pace range | rpm | 3.fifteen-315(21steps)CCW 3.5-290(12steps)CW | |||
| Feed | |||||
| Longitudinal feed speed | mm/r | 0.1-12(56kinds) | |||
| Transversal feed speed | mm/r | 0.05-6(56kinds) | |||
| Metric threads selection | mm | 1-one hundred twenty(44kinds) | |||
| Inch threads variety | TPI | 3/8-28(31kinds) | |||
| Module threads range | mm | 0.5-sixty(45kinds) | |||
| Pitch threads assortment | DP | 1-56(25kinds) | |||
| Tailstock | |||||
| Tailstock quill taper | – | Metric No.80 | |||
| Tailstock quill travel | mm | 300 | |||
| Diameter of tailstock quill | mm | 160 | |||
| Power | |||||
| Major motor CZPT | kw | 22 | |||
| Coolant pump CZPT | kw | 0.a hundred twenty five | |||
Regular Add-ons:
4 jaw chuck Φ1000mm(1 set)
Continual rest Φ70-480(1 set, for a lot more than 2000mm)
Adhere to rest(1 established, for more than 2000mm)
Morse No.6 heart(1 set)
Centre bush(1 established)
Tools(1 set)
Basis screws(1 established)
Optional Components:
Constant relaxation(Φ400-Φ700mm)
4 jaw chuck Φ1250mm
Taper-turning system
Metric chassing dial device
Inch chassing dial gadget
Inch guide screw
T-variety instrument put up-
TB 1610 tapered bushings can be used in a variety of industrial purposes. For correcting common and non-regular V-belts, timing smoothing wheels, sprockets, TB hubs, couplings and other factors.