Item Description
Item specifics
Tapered roller bearings are bearings that can get huge axial forces (i.e., they are great thrust bearings) as effectively as currently being in a position to sustain large radial forces.
The inner and outer ring raceways are segments of cones and the rollers are also manufactured with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a frequent stage on the primary axis of the bearing.
The rollers are guided by a flange on the inner ring. This stops the rollers from sliding out at high pace due to their momentum.
The more substantial the 50 % angles of these cones the larger the axial power that the bearing can sustain.
Tapered roller bearings are separable and have the subsequent parts: outer ring, inner ring, and roller assembly (made up of the rollers and a cage). The CZPT -separable internal ring and roller assembly is called the cone, and the outer ring is known as the cup.
Basic | Nominal CZPT Proportions | Preferred Shoulder Diameters | Basic | Successful | Limiting | Weight | |||||||
Load Rankings | Center Load | Speeds | |||||||||||
Bearing | d | D | T | B | C | r1 | r2 | ||||||
No. | (Min Interior Ring) | (Min Out Ring) | Cr | Cor | a | Grease | Oil | (Approx.) | |||||
mm | mm | mm | mm | mm | mm | mm | KN | KN | mm | rpm | rpm | kg | |
35713 | seventeen | forty | thirteen.twenty five | twelve | 11 | 1 | 1 | twenty.ninety one | 21.ninety two | nine.9 | 9900 | 13000 | .078 |
35714 | twenty | 47 | 15.twenty five | fourteen | 12 | one | 1 | 28.forty nine | thirty.6 | eleven.two | 8800 | 12000 | .124 |
35715 | twenty five | fifty two | sixteen.25 | fifteen | thirteen | one | one | 32.67 | 36.ninety seven | twelve.5 | 7300 | 10000 | .151 |
35716 | 30 | sixty two | seventeen.25 | 16 | fourteen | 1 | one | 43.58 | 50.forty eight | 13.8 | 6300 | 8400 | .229 |
35717 | 35 | 72 | eighteen.25 | 17 | fifteen | one.five | one.five | 54.28 | 63.forty seven | 15.3 | 5500 | 7400 | .328 |
35718 | 40 | eighty | 19.25 | eighteen | 16 | one.five | 1.5 | sixty two.95 | seventy three.ninety two | 16.9 | 4900 | 6600 | .419 |
35719 | forty five | 85 | 20.seventy five | 19 | sixteen | one.5 | one.five | 67.84 | 83.58 | eighteen.six | 4400 | 6000 | .474 |
35710 | 50 | ninety | 21.seventy five | 20 | seventeen | one.5 | one.five | 73.26 | 92.1 | 20 | 4000 | 5300 | .529 |
35711 | 55 | a hundred | 22.seventy five | 21 | 18 | 2 | 1.five | 90.fifty one | 113.seven | 21 | 3600 | 5000 | .seventy four |
35712 | sixty | 110 | 23.75 | 22 | 19 | two | 1.five | 102.85 | a hundred thirty.07 | 22 | 3400 | 4500 | .904 |
35713 | 65 | one hundred twenty | 24.75 | 23 | twenty | two | 1.5 | 118.81 | 152.69 | 23.five | 3100 | 4200 | 1.18 |
35714 | 70 | a hundred twenty five | 26.five | 24 | 21 | two | one.5 | 131.seven | 173.seventy three | 25.5 | 2900 | 4000 | 1.26 |
35715 | seventy five | one hundred thirty | 27.five | twenty five | 22 | 2 | 1.5 | 138.06 | 185.forty five | 27 | 2800 | 3800 | one.41 |
35716 | 80 | a hundred and forty | 28.twenty five | 26 | 22 | 2.5 | two | 159.forty three | 212.ninety five | 27.5 | 2600 | 3400 | 1.seventy two |
35717 | eighty five | 150 | 30.five | 28 | 24 | two.5 | two | 176.34 | 236.ninety five | 30 | 2400 | 3200 | 2.fourteen |
35718 | 90 | a hundred and sixty | 32.5 | thirty | 26 | two.five | 2 | 198.94 | 269.seventy two | 32 | 2200 | 3000 | 2.66 |
35719 | ninety five | 170 | 34.five | 32 | 27 | 3 | two.five | 255.76 | 309.23 | 34 | 2200 | 2800 | three.07 |
35710 | 100 | one hundred eighty | 37 | 34 | 29 | three | two.5 | 258 | 335 | 36 | 2000 | 2700 | three.78 |
35711 | one hundred and five | 190 | 39 | 36 | 30 | 3 | 2.5 | 287 | 380 | 38.one | 1900 | 2500 | four.51 |
35712 | one hundred ten | two hundred | 41 | 38 | 32 | three | two.five | 325 | 435 | forty.one | 1800 | 2400 | 5.28 |
35714 | 120 | 215 | forty three.five | 40 | 34 | three | 2.5 | 345 | 470 | forty four.4 | 1700 | 2200 | 6.28 |
35716 | a hundred thirty | 230 | forty three.seventy five | 40 | 34 | four | 3 | 375 | 505 | 45.8 | 1500 | 2000 | seven.25 |
35718 | a hundred and forty | 250 | 45.seventy five | 42 | 36 | four | three | 390 | 515 | 48.nine | 1400 | 1900 | 8.seventy four |
☆We reserve the correct to modify requirements and other information integrated in this catalogue without having recognize. |
Nominal CZPT Proportions | Preferred Shoulder Diameters | Basic Load | Successful Load | Limiting | |||||||||
Bearing | d | D | T | B | C | r1 | r2 | Ratings | Heart | Speeds | Fat | ||
No. | (Min Inner Ring) | (Min Out Ring) | Cr | Cor | a | Grease | Oil | Kg | |||||
mm | mm | mm | mm | mm | mm | mm | KN | KN | mm | rpm | rpm | kg | |
mm | mm | mm | mm | mm | mm | mm | KN | KN | mm | rpm | rpm | kg | |
30302 | 15 | 42 | 14.25 | thirteen | eleven | one | 1 | 23.2 | 21.six | nine.6 | 9900 | 13000 | .094 |
30303 | 17 | 47 | 15.25 | fourteen | 12 | 1 | 1 | 28.nine | 27.two | 10.4 | 9000 | 12000 | .129 |
30304 | twenty | 52 | sixteen.25 | 15 | thirteen | 1.5 | one.5 | 35.five | 34 | eleven.one | 8000 | 11000 | .one hundred sixty five |
30305 | 25 | sixty two | 18.twenty five | seventeen | fifteen | one.five | 1.5 | forty eight.five | 48.1 | thirteen | 6700 | 8900 | .263 |
30306 | thirty | 72 | twenty.75 | 19 | 16 | 1.five | one.5 | 60 | 63.1 | fifteen.3 | 5700 | 7600 | .387 |
30307 | 35 | eighty | 22.75 | 21 | eighteen | 2 | one.five | seventy five.3 | 82.6 | sixteen.8 | 5000 | 6700 | .515 |
30308 | 40 | 90 | twenty five.25 | 23 | 20 | 2 | one.five | 91.5 | 107.six | 19.5 | 4400 | 5900 | .747 |
30309 | 45 | a hundred | 27.25 | twenty five | 22 | 2 | 1.five | 111 | 129.eight | 21.three | 4000 | 5300 | .984 |
3571 | fifty | 110 | 29.25 | 27 | 23 | two.5 | two | 133 | 152 | 23 | 3600 | 4800 | 1.31 |
3571 | fifty five | a hundred and twenty | 31.five | 29 | twenty five | two.5 | two | a hundred and fifty five | 179 | 24.five | 3300 | 4400 | 1.sixty six |
3571 | sixty | 130 | 33.five | 31 | 26 | three | 2.5 | 183 | 214 | 26.five | 3000 | 4000 | two.06 |
3571 | sixty five | one hundred forty | 36 | 33 | 28 | three | 2.five | 203 | 238 | 28.five | 2800 | 3700 | 2.fifty five |
3571 | 70 | 150 | 38 | 35 | 30 | 3 | two.5 | 230 | 272 | 30 | 2600 | 3500 | three.06 |
3571 | 75 | 160 | 40 | 37 | 30 | 3 | 2.five | 255 | 305 | 32 | 2400 | 3200 | three.fifty seven |
3 0571 | 80 | one hundred seventy | 42.five | 39 | 33 | three | 2.5 | 297 | 350 | 34 | 2300 | 3000 | four.forty one |
three 0571 | eighty five | 180 | forty four.five | forty one | 34 | four | three | 305 | 365 | 35.5 | 2100 | 2900 | five.2 |
3 0571 | ninety | 190 | forty six.five | forty three | 36 | four | 3 | 270 | 320 | 37.five | 1940 | 2640 | six.03 |
3571 | ninety five | 200 | 49.five | 45 | 38 | 4 | three | 296 | 355 | 40 | 1900 | 2530 | 6.98 |
30320 | 100 | 215 | 51.five | 47 | 39 | four | three | 365 | 445 | 41.five | 1800 | 2400 | 8.fifty six |
30321 | a hundred and five | 225 | fifty three.five | forty nine | forty one | four | three | 455 | 565 | forty three.2 | 1700 | 2300 | 9.52 |
30322 | a hundred and ten | 240 | 54.5 | fifty | forty two | four | three | 485 | 595 | 45.one | 1600 | 2200 | eleven |
Nominal CZPT Dimensions | Preferred Shoulder Diameters | Basic Load | Powerful Load | Limiting | |||||||||
Bearing | d | D | T | B | C | r1 | r2 | Ratings | Center | Speeds | Weight | ||
No. | (Min Inner Ring) | (Min Out Ring) | Cr | Cor | a | Grease | Oil | Kg | |||||
mm | mm | mm | mm | mm | mm | mm | KN | KN | mm | rpm | rpm | kg | |
32004 | twenty | forty two | 15 | fifteen | 12 | .6 | .6 | 24.9 | 27.nine | 10.five | 9500 | 13000 | .097 |
32005 | 25 | forty seven | fifteen | fifteen | twelve | .6 | .6 | 27.8 | 33.5 | 12 | 8000 | 11000 | .114 |
32006 | 30 | fifty five | seventeen | seventeen | 13 | 1 | one | 37.five | forty six.5 | thirteen.5 | 6900 | 9200 | .166 |
32007 | 35 | sixty two | eighteen | eighteen | 14 | one | one | forty one.5 | 52.5 | 15.five | 6100 | 8100 | .224 |
32008 | forty | sixty eight | 19 | 19 | 15 | 1 | one | fifty | sixty five.five | 15 | 5300 | 7100 | .273 |
32009 | 45 | seventy five | 20 | 20 | sixteen | one | one | fifty seven.5 | seventy six.5 | 16.5 | 4800 | 6400 | .346 |
32571 | 50 | 80 | 20 | 20 | sixteen | one | 1 | 62.five | 88 | seventeen.five | 4400 | 6000 | .366 |
32011 | fifty five | 90 | 23 | 23 | 18 | 1.five | 1.5 | eighty.five | 118 | twenty | 4000 | 5400 | .563 |
32012 | 60 | ninety five | 23 | 23 | eighteen | one.five | 1.five | eighty two | 123 | 21 | 3700 | 5000 | .576 |
32013 | sixty five | one hundred | 23 | 23 | 18 | 1.5 | 1.5 | 83 | 128 | 22.five | 3400 | 4600 | .sixty three |
32014 | 70 | 110 | twenty five | 25 | 19 | one.5 | 1.five | a hundred and five | one hundred sixty | 24 | 3200 | 4300 | .848 |
32015 | seventy five | a hundred and fifteen | 25 | 25 | 19 | one.five | one.five | 106 | 167 | twenty five.five | 3000 | 4000 | .909 |
32016 | eighty | 125 | 29 | 29 | 22 | 1.five | 1.5 | 139 | 216 | 27 | 2800 | 3700 | one.28 |
32017 | eighty five | 130 | 29 | 29 | 22 | 1.5 | one.five | 142 | 224 | 28.5 | 2600 | 3600 | one.35 |
32018 | ninety | one hundred forty | 32 | 32 | 24 | 2 | one.five | 168 | 270 | 30 | 2500 | 3300 | one.79 |
32019 | ninety five | 145 | 32 | 32 | 24 | two | 1.five | 171 | 280 | 31.five | 2400 | 3200 | 1.eighty three |
32571 | a hundred | 150 | 32 | 32 | 24 | two | 1.five | one hundred seventy | 281 | 32.5 | 2200 | 3000 | one.91 |
32571 | a hundred and five | a hundred and sixty | 35 | 35 | 26 | two.5 | two | 204 | 340 | 34.3 | 2100 | 2800 | 2.forty eight |
32571 | 110 | a hundred and seventy | 38 | 38 | 29 | 2.five | 2 | 236 | 390 | 35.9 | 2000 | 2700 | three.09 |
32571 | one hundred twenty | 180 | 38 | 38 | 29 | 2.five | two | 245 | 420 | 39.7 | 1800 | 2500 | three.27 |
32026 | 130 | two hundred | 45 | 45 | 34 | two.5 | two | 320 | 545 | 43.nine | 1700 | 2200 | 5.06 |
Nominal CZPT Dimensions | Preferred Shoulder Diameters | Basic Load | Effective Load | Limiting | |||||||||
Bearing | d | D | T | B | C | r1 | r2 | Ratings | Center | Speeds | Bodyweight | ||
No. | (Min Interior Ring) | (Min Out Ring) | Cr | Cor | a | Grease | Oil | Kg | |||||
mm | mm | mm | mm | mm | mm | mm | KN | KN | mm | rpm | rpm | kg | |
32203 | 17 | 40 | seventeen.twenty five | sixteen | 14 | 1 | one | 27.3 | 28.three | 11.five | 9900 | 13200 | .102 |
32204 | 20 | 47 | 19.twenty five | 18 | 15 | one | 1 | 36.five | 39.5 | twelve.5 | 8800 | 12000 | .16 |
32205 | 25 | 52 | 19.twenty five | 18 | sixteen | one | 1 | forty two | forty seven | 14 | 7300 | 9810 | .187 |
32206 | 30 | sixty two | 21.25 | 20 | seventeen | 1 | 1 | fifty four.5 | sixty four | 15.5 | 6300 | 8400 | .301 |
32207 | 35 | seventy two | 24.25 | 23 | 19 | 1.5 | one.5 | 72.five | 87 | seventeen.five | 5500 | 7400 | .457 |
32208 | forty | eighty | 24.seventy five | 23 | 19 | 1.5 | one.five | seventy nine.5 | 93.5 | 19 | 4900 | 6600 | .558 |
32209 | forty five | eighty five | 24.seventy five | 23 | 19 | 1.five | 1.five | eighty two | 100 | twenty | 4400 | 6000 | .607 |
32210 | 50 | ninety | 24.seventy five | 23 | 19 | one.five | one.5 | 87.5 | 109 | 21 | 4000 | 5300 | .648 |
32211 | fifty five | 100 | 26.seventy five | 25 | 21 | two | 1.five | 108 | 134 | 22.5 | 3600 | 5000 | .876 |
32212 | 60 | 110 | 29.75 | 28 | 24 | two | one.five | 130 | 164 | 25 | 3400 | 4500 | 1.18 |
32213 | 65 | a hundred and twenty | 32.seventy five | 31 | 27 | 2 | 1.5 | 159 | 206 | 27 | 3100 | 4200 | one.fifty eight |
32214 | 70 | a hundred twenty five | 33.25 | 31 | 27 | 2 | 1.5 | 166 | 220 | 28.5 | 2900 | 4000 | one.sixty eight |
32215 | seventy five | 130 | 33.twenty five | 31 | 27 | two | one.5 | 168 | 224 | 30 | 2800 | 3800 | 1.seventy four |
32216 | 80 | 140 | 35.25 | 33 | 28 | two.5 | 2 | 199 | 265 | 31 | 2600 | 3400 | two.eighteen |
32217 | 85 | a hundred and fifty | 38.5 | 36 | thirty | two.five | 2 | 224 | three hundred | 33.five | 2400 | 3200 | 2.75 |
32218 | ninety | one hundred sixty | 42.5 | forty | 34 | two.5 | two | 262 | 360 | 36 | 2200 | 3000 | 3.forty nine |
32219 | ninety five | a hundred and seventy | 45.5 | forty three | 37 | 3 | two.five | 299 | 415 | 39 | 2200 | 2800 | four.3 |
32220 | 100 | a hundred and eighty | forty nine | forty six | 39 | 3 | 2.5 | 330 | 465 | forty one.5 | 2000 | 2700 | five.twelve |
32221 | a hundred and five | one hundred ninety | fifty three | fifty | 43 | three | 2.5 | 380 | 540 | 44.8 | 1900 | 2500 | 6.twenty five |
32222 | one hundred ten | two hundred | 56 | fifty three | 46 | 3 | two.5 | 420 | 605 | forty seven.two | 1800 | 2400 | 7.35 |
32224 | 120 | 215 | 61.5 | fifty eight | 50 | 3 | two.5 | 460 | 680 | 52 | 1700 | 2200 | nine |
five. FACTORY
Oukai bearing manufacturing co.,ltd is a fast-growing bearing manufacture.it is positioned In yandian town,the largest bearing production base in CZPT .the primary products are Deep groove ball bearings .We have beautiful technological innovation,substantial precision gear,best testing approaches, stable and trustworthy good quality, heat and considerate services,Which win thepraise and welcome from each domestic and overseas.
Our Benefits:
1. Globe-Class CZPT : We give CZPT CZPT ers with all varieties of indigenous bearing with planet-class top quality.
2. CZPT or CZPT -Stand CZPT s: Any prerequisite for CZPT regular bearings is Effortlessly Fulfilled by us due to its large information and hyperlinks in the industry.
3. Authentic items With Superb Top quality: The business has always proved the one hundred% good quality merchandise it gives with authentic intent.
4. Soon after Product sales Provider and CZPT nical Guidance: The organization gives right after-income provider and specialized support as for every the CZPT er’s requirements and requirements.
five. Fast Delivery: The organization provides just-in-time shipping with its streamlined supply chain.
SAMPLES
one. Samples amount: 1-ten PCS are CZPT .
2. Cost-free samples: It is dependent on the Model No., substance and amount. Some of the bearings samples need shopper to shell out samples charge and delivery expense.
3. It is much better to start your purchase with CZPT Assurance to get total safety for your samples get.
Customized
The CZPT ized Emblem or drawing is suitable for us.
MOQ
1. MOQ: ten PCS normal bearings.
2. MOQ: a thousand PCS CZPT ized your brand name bearings.
OEM Plan
one. We can printing your manufacturer (brand, artwork)on the shield or laser engraving your brand name on the defend.
2. We can CZPT your packaging according to your design and style
3. All copyright personal by consumers and we promised don’t disclose any data.
FAQ
1.What is the bare minimum get amount for this solution?
Can be negotiated, we will try out CZPT best to satisfy CZPT er wants.Our firm is mainly primarily based on wholesale income, most CZPT ers’orders are a lot more than 1 ton.
2.What is your most recent shipping time?
Most orders will be transported inside of 3-ten times of payment becoming obtained.
three.Does your company have quality assurance?
Yes, for 2 years.
4.What is the competitiveness of your firm’s items in comparison to other businesses?
High precision, higher speed, reduced noise.
five.What are the rewards of your company’s services compared to other companies?
Answer concerns on the web 24 hrs a day, reply in a timely way, and give CZPT paperwork necessary by CZPT ers for CZPT s clearance or product sales. 100% after-income support.
six.Which payment method does your company assistance?
Do CZPT very best to meet CZPT er demands, negotiable.
seven.How to make contact with us speedily?
Please ship us an inquiry or information and go away your other make contact with data, this kind of as telephone number, account or account, we will get in touch with you as quickly as achievable and supply the detailed information you need to have.
You should feel cost-free to contact us, if you have any other issue
How does a tapered bushing perform? The tapered portion of the component is pushed through a higher-toughness screw with a mating hub, allowing the bushing to be securely fastened to the shaft. The force of the clamp can transmit higher torque (rotational pressure). This style makes certain that a effectively mounted sprocket and pulley shaft are aligned with straightforward positioning.