Product Description
Taper lock bushing,
1. Taper bushes form the most convenient and cost effective method of fixing components to a
Mating shaft, without the need for any machining process.
2. Size ranges from 1,more information,please contact us.
3. Easy to install and remove.
4. Shallow keyway is available.
To Install:
1.Clean shaft,bore,and outside of bushing,and bore of hub(taking bushing from hub if already assembled).Remove any oil.lacquer,or dirt.
Placing bushing in hub and match half holes to make complete holes(each complete hole will be threaded on 1 side only).
2.Oil thread and point of set screws or thread and under head of cap screws.
Place screws loosely in holes thatare threaded in hub 1 side see install bore.
3.Make sure bushing is free in hub.Slip assembly CHINAMFG shaft and locatd in position desired.
4.Tighten screws alternately and evenly until all are pulled up very tightly.Use a piece of pipe on wrench to increase leverage,
please refer to taper bushing screw torque which need to be asked.
5.If stall key,place it in the shaft keyway before install taper bushing.
6.After drive has been running under load for a short time stop and check tightness of screws.Fill other holes with grease to exclude dirt.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | ISO |
|---|---|
| Pulley Sizes: | Type C |
| Manufacturing Process: | Casting |
| Material: | Iron |
| Surface Treatment: | Oxygenation |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
| Samples: |
US$ 1500/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Are there any online calculators for determining the required taper bush size?
Yes, there are online calculators available that can help in determining the required taper bush size for specific applications. These calculators utilize various input parameters such as shaft diameter, hub diameter, torque, speed, and other relevant factors to provide recommendations on the appropriate taper bush size. Here are some sources where you can find online calculators for determining the required taper bush size:
- Manufacturer Websites: Many taper bush manufacturers provide online calculators on their websites to assist customers in selecting the correct taper bush size. These calculators are often based on the manufacturer’s specific product range and include fields for inputting the necessary parameters. By entering the required information, such as shaft and hub dimensions, torque, and speed, the calculator can generate recommendations on the suitable taper bush size.
- Engineering and Mechanical Websites: Several engineering and mechanical websites offer online calculators and tools that cover a wide range of mechanical components, including taper bushes. These calculators are typically designed to provide general recommendations and may not be specific to a particular manufacturer’s product range. They often require input parameters such as shaft diameter, hub diameter, and other relevant dimensions to calculate the appropriate taper bush size.
- Mobile Applications: Some mobile applications cater to mechanical engineering and power transmission calculations. These apps may include features for determining the required taper bush size based on input parameters such as shaft diameter, hub diameter, torque, and speed. They can be convenient for on-the-go calculations and are often available for both Android and iOS devices.
When using online calculators for determining the required taper bush size, it is important to ensure that the input parameters are accurate and representative of the specific application requirements. The calculated results should serve as a starting point for selecting the appropriate taper bush size, and it is advisable to cross-reference the recommendations with manufacturer catalogs or consult with technical experts to verify the suitability of the chosen size.
Additionally, keep in mind that while online calculators can be helpful tools, they may not account for all the nuances and specific factors of your application. It is still recommended to consult with taper bush manufacturers, suppliers, or engineering professionals to validate the calculated size and ensure a proper fit for your specific application.
By utilizing online calculators as a guide, you can simplify the process of determining the required taper bush size and make informed decisions when selecting the appropriate component for your application.
Are there online forums discussing the proper maintenance of taper bushes?
Yes, there are online forums where you can find discussions and information about the proper maintenance of taper bushes. These forums serve as platforms for professionals, enthusiasts, and individuals with expertise in mechanical engineering, power transmission, and machinery maintenance to share knowledge and discuss various topics related to taper bushes and their maintenance. Here are some examples of online forums where you can find discussions on taper bush maintenance:
- Mechanical Engineering Forums: Online forums dedicated to mechanical engineering often have sections or threads where users discuss topics related to machinery maintenance. These forums provide a platform for professionals and enthusiasts to exchange information and share experiences regarding taper bushes and their proper maintenance. Participating in these discussions can provide valuable insights, tips, and best practices from a community of experts.
- Power Transmission and Machinery Maintenance Forums: There are online forums specifically focused on power transmission systems, machinery maintenance, and related topics. These forums cover a wide range of subjects, including taper bushes and their maintenance. Users can ask questions, seek advice, and share their experiences regarding the proper maintenance procedures, troubleshooting, lubrication, or replacement of taper bushes in different machinery applications.
- Industry-Specific Forums: Depending on the industry you are interested in, there may be online forums or communities that cater to specific sectors such as automotive, manufacturing, or construction. These industry-specific forums often have sections or discussions related to machinery maintenance, where taper bushes may be a topic of interest. Engaging in these forums can allow you to connect with professionals from your specific industry and gain insights into taper bush maintenance practices relevant to your field.
- Social Media Groups and Pages: Social media platforms like Facebook, LinkedIn, or Reddit host various groups, pages, or communities focused on engineering, mechanical maintenance, or specific industries. Joining relevant groups or following pages dedicated to machinery maintenance can provide access to discussions, articles, and resources related to taper bushes and their maintenance. These platforms also allow you to connect with industry professionals and enthusiasts who can share their knowledge and experiences.
When engaging in online forums, it is important to review the forum guidelines, follow proper etiquette, and respect the rules of each community. Be mindful of the accuracy and reliability of the information shared, and consider cross-referencing multiple sources to validate the advice or recommendations provided.
By exploring these online forums and actively participating in discussions, you can find valuable information, tips, and insights on the proper maintenance of taper bushes, enhancing your understanding and proficiency in taper bush maintenance practices.
What are the advantages of using taper bushes in power transmission systems?
Taper bushes offer several advantages when used in power transmission systems. These advantages contribute to the efficiency, reliability, and ease of maintenance in power transmission applications. Here are some key advantages of using taper bushes:
- Easy Installation: Taper bushes are designed to simplify the installation process. They have a tapered bore that allows for easy and precise fitting onto the shaft. By using a simple tightening method, such as tightening a set screw or using a locking device, the taper bush securely locks onto the shaft, providing a reliable connection. The ease of installation reduces downtime and labor costs during equipment assembly or maintenance.
- Secure Shaft Connection: Taper bushes provide a secure and rigid connection between the shaft and the mating component. The taper angle of the bush ensures a tight fit, minimizing any axial movement or slippage between the shaft and the component. This secure connection enhances power transmission efficiency and prevents power loss or misalignment issues, which can lead to equipment damage or decreased performance.
- Flexibility and Interchangeability: Taper bushes offer flexibility in power transmission systems. They are available in various sizes, allowing for compatibility with different shaft diameters. This interchangeability enables easier component replacement, as taper bushes can be easily swapped out for different sizes without the need for significant modifications. It also simplifies inventory management, as a range of taper bushes can cover multiple shaft size requirements.
- Reduced Downtime and Maintenance: The design of taper bushes facilitates quick and easy removal and replacement of components during equipment maintenance or repair. With the use of split taper bushes or quick-detachable (QD) taper bushes, the process of disassembling and reassembling power transmission systems becomes faster and more efficient. This reduces downtime, allowing for expedited maintenance procedures and minimizing production or operational disruptions.
- Cost-Effectiveness: Taper bushes offer a cost-effective solution for power transmission applications. They are generally more affordable compared to alternative methods of shaft connection, such as keyways or splines. Additionally, taper bushes eliminate the need for complex machining processes on the shaft, reducing manufacturing costs and lead times. Their ease of installation and maintenance also contribute to overall cost savings in terms of labor and downtime.
- Vibration Damping and Misalignment Compensation: Taper bushes provide some level of vibration damping and compensation for minor shaft misalignments. The taper angle and the clamping action of the bush help absorb and distribute vibrations, reducing stress on the shaft and other components. This feature is beneficial in power transmission systems where vibration or misalignment issues can negatively impact equipment performance, reliability, and service life.
Overall, the advantages of using taper bushes in power transmission systems include easy installation, secure shaft connection, flexibility, reduced downtime, cost-effectiveness, and vibration damping capabilities. These advantages make taper bushes a popular choice for connecting rotating shafts to various components, such as pulleys, sprockets, gears, and couplings, in a wide range of industrial applications.
editor by CX 2024-04-09
China Hot selling 1210 Taper Lock Bush with 24mm Bore 8mm Keyway bushing arm
Product Description
Taper lock bushing,
1. Taper bushes form the most convenient and cost effective method of fixing components to a
Mating shaft, without the need for any machining process.
2. Size ranges from 1,more information,please contact us.
3. Easy to install and remove.
4. Shallow keyway is available.
To Install:
1.Clean shaft,bore,and outside of bushing,and bore of hub(taking bushing from hub if already assembled).Remove any oil.lacquer,or dirt.
Placing bushing in hub and match half holes to make complete holes(each complete hole will be threaded on 1 side only).
2.Oil thread and point of set screws or thread and under head of cap screws.
Place screws loosely in holes thatare threaded in hub 1 side see install bore.
3.Make sure bushing is free in hub.Slip assembly CHINAMFG shaft and locatd in position desired.
4.Tighten screws alternately and evenly until all are pulled up very tightly.Use a piece of pipe on wrench to increase leverage,
please refer to taper bushing screw torque which need to be asked.
5.If stall key,place it in the shaft keyway before install taper bushing.
6.After drive has been running under load for a short time stop and check tightness of screws.Fill other holes with grease to exclude dirt.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | ISO |
|---|---|
| Pulley Sizes: | Type C |
| Manufacturing Process: | Casting |
| Material: | Iron |
| Surface Treatment: | Oxygenation |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
| Samples: |
US$ 1500/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What are the temperature and environmental considerations when using taper bushes?
When using taper bushes in various applications, it is important to consider the temperature and environmental factors that can affect their performance and longevity. Here are some key considerations:
- Temperature Range: Taper bushes are typically designed to operate within specific temperature ranges. High temperatures can affect the material properties of the taper bush, leading to dimensional changes, reduced strength, or accelerated wear. Similarly, extremely low temperatures can cause brittleness and decreased flexibility. It is crucial to check the manufacturer’s specifications and ensure that the selected taper bush is suitable for the anticipated temperature range in your application.
- Corrosive Environments: Taper bushes can be exposed to corrosive environments, such as those containing moisture, chemicals, or other corrosive substances. Corrosion can affect the integrity of the taper bush and compromise its performance. In such cases, it is important to select taper bushes with appropriate anti-corrosion properties, such as stainless steel construction, corrosion-resistant coatings, or polymer materials that offer inherent resistance to corrosion.
- Dust and Contaminants: In applications where taper bushes are exposed to dust, dirt, or other contaminants, it is important to consider their potential impact. Dust and contaminants can accumulate on the taper bush surfaces, leading to increased friction, wear, and potential damage to the mating components. Regular cleaning and maintenance practices should be implemented to ensure the proper functioning of taper bushes in such environments.
- Lubrication: Lubrication plays a critical role in the performance and longevity of taper bushes. Proper lubrication helps reduce friction, wear, and heat generation between the taper bush and mating components. The choice of lubricant should take into account factors such as temperature, speed, load, and the presence of any specific contaminants or conditions. It is essential to follow the manufacturer’s recommendations regarding lubrication intervals, lubricant type, and application methods.
- Shock and Vibration: Taper bushes can be subjected to shock and vibration in certain applications. Excessive shock and vibration levels can lead to increased stresses, fatigue, and potential loosening of the taper bush. It is important to select taper bushes that are designed to withstand the expected levels of shock and vibration and ensure proper installation and secure fastening to minimize the risk of failure.
Understanding and addressing the temperature and environmental considerations when using taper bushes is crucial for ensuring their optimal performance, longevity, and reliability. By selecting taper bushes that are suitable for the anticipated operating conditions and implementing appropriate maintenance practices, you can maximize the effectiveness of your power transmission system and minimize the risk of premature failures or performance issues.
Are there reviews comparing taper bushes from different manufacturers?
Yes, there are reviews available that compare taper bushes from different manufacturers. These reviews can provide valuable insights into the performance, quality, and features of taper bushes offered by various manufacturers. Here’s where you can find reviews comparing taper bushes:
- Online Industrial Equipment Marketplaces: Online marketplaces specializing in industrial equipment often have customer reviews and ratings for different products, including taper bushes. These reviews are typically provided by users who have purchased and used the taper bushes in their applications. Reading these reviews can give you an idea of the experiences and opinions of other users regarding the performance, durability, and compatibility of taper bushes from different manufacturers.
- Engineering and Mechanical Forums: Online forums and communities focused on engineering or mechanical topics can be excellent sources for finding reviews and discussions comparing taper bushes. These forums often have dedicated sections or threads where users share their experiences, recommendations, and comparisons of taper bushes from different manufacturers. Engaging in these discussions can help you gather valuable insights and perspectives from professionals and enthusiasts in the field.
- Industrial Magazines and Publications: Industrial magazines and publications that cover mechanical engineering or power transmission topics may include product reviews or comparisons of taper bushes. These reviews are typically conducted by experts in the field or industry professionals who evaluate the performance, design, and suitability of taper bushes from different manufacturers. Checking these magazines or publications can provide you with detailed and unbiased assessments of the various taper bushes available in the market.
- Industry Trade Shows and Exhibitions: Attending industry trade shows, exhibitions, or conferences focused on mechanical engineering or power transmission systems can offer opportunities to see and compare taper bushes from different manufacturers in person. These events often feature product displays and demonstrations, allowing you to assess the quality, design, and features of taper bushes firsthand. Additionally, you may have the chance to interact with representatives from different manufacturers and gather information or insights directly from them.
- Manufacturer or Supplier Websites: Some manufacturers or suppliers may include customer testimonials or case studies on their websites, where users share their experiences and feedback on the taper bushes they have used. While these sources may be biased towards the manufacturer’s own products, they can still provide useful information and perspectives on the performance and compatibility of their taper bushes.
It’s important to note that while reviews can be helpful in making informed decisions, they should be considered alongside other factors such as technical specifications, compatibility requirements, and manufacturer reputation. Each application and system may have unique considerations, so it’s advisable to evaluate multiple sources of information and consult with experts if needed.
By exploring these different sources, you can find reviews and comparisons of taper bushes from different manufacturers, enabling you to make more informed decisions when selecting the most suitable taper bushes for your specific application needs.
What is a taper bush, and how does it work in mechanical applications?
A taper bush, also known as a taper lock bushing, is a mechanical component used to secure rotating shafts or hubs to mating equipment, such as pulleys, sprockets, or gears. It provides a reliable and secure connection that can withstand high torque and axial loads. Here’s how a taper bush works in mechanical applications:
A taper bush consists of a tapered sleeve with an external taper and a corresponding tapered bore. The external taper is designed to match the taper of the mating component, while the tapered bore fits onto the shaft or hub. The taper of the bush and the mating component create a tight interference fit when assembled.
The installation process involves sliding the taper bush onto the shaft or hub and then tightening a set of screws or bolts. As the screws or bolts are tightened, they exert radial pressure on the taper bush, causing it to expand and grip the mating component tightly. This creates a frictional connection between the taper bush, the shaft or hub, and the mating component, effectively locking them together.
The advantages of using a taper bush in mechanical applications include:
- Easy Installation: Taper bushings are relatively simple to install. They eliminate the need for complex machining or keyways on the shaft or hub, as the interference fit provides the necessary grip.
- Secure Connection: The taper lock mechanism ensures a secure and backlash-free connection between the shaft or hub and the mating component. It can withstand high torque and axial loads without slipping or loosening during operation.
- Accommodation of Different Shaft Sizes: Taper bushings are available in various sizes and tapers to accommodate different shaft diameters and mating components. This versatility allows for flexibility and interchangeability in mechanical designs.
- Easy Removal and Replacement: In case of maintenance or replacement needs, taper bushings can be easily removed by loosening the set screws or bolts. This facilitates quick disassembly and reassembly without causing damage to the shaft or hub.
- Reduced Downtime: The ease of installation and removal, combined with the secure connection provided by taper bushings, helps minimize downtime during equipment maintenance or component replacement.
Taper bushings are commonly used in a wide range of mechanical applications, including power transmission systems, conveyor systems, industrial equipment, and automotive applications. They offer a reliable and cost-effective method for connecting rotating shafts or hubs to mating components, ensuring efficient power transmission and reliable operation.
When using taper bushings, it’s important to follow the manufacturer’s guidelines for installation and tightening torque to ensure proper functionality and avoid any potential issues.
editor by CX 2024-01-04
China 1210 3535 Taper Lock Bushing bushing and bearing
Applicable Industries: Manufacturing Plant, Construction works
Model Number: 1,more information,please contact us.3. Easy to install and remove.4. Shallow keyway is available.
| Taper Bush Size | A | B | D | Screw Dimension |
| 1008 | 1.386 | 7/8 | 1-21/64 | 1/4 X1/2 |
| 1108 | 1.511 | 7/8 | 1-29/64 | 1/4 X1/2 |
| 1210 | 1-7/8 | 1 | 1-3/4 | 3/8 X5/8 |
| 1215 | 1-7/8 | 1-1/2 | 1-3/4 | 3/8 X5/8 |
| 1310 | 2 | 1 | 1-7/8 | 3/8 X5/8 |
| 1610 | 2-1/4 | 1 | 2-1/8 | 3/8 X5/8 |
| 1615 | 2-1/4 | 1-1/2 | 2-1/8 | 3/8 X5/8 |
| 2012 | 2-3/4 | 1-1/4 | 2-5/8 | 7/16 X7/8 |
| 2017 | 2-3/4 | 1-3/4 | 2-5/8 | 7/16 X7/8 |
| 2517 | 3-3/8 | 1-3/4 | 3-1/4 | 1/2X1 |
| 2525 | 3-3/8 | 2-1/2 | 3-1/4 | 1/2X1 |
| 3571 | 4-1/4 | 2 | 4 | 5/8X11/4 |
| 3030 | 4-1/4 | 3 | 4 | 5/8X11/4 |
| 3525 | 5 | 2-1/2 | 4.83 | 1/2X11/2 |
| 3535 | 5 | 31/2 | 4.83 | 1/2X11/2 |
| 4030 | 5-3/4 | 3 | 5.54 | 5/8X13/4 |
| 4040 | 5-3/4 | 4 | 5.54 | 5/8X13/4 |
| 4535 | 6-3/8 | 3-1/2 | 6.13 | 3/4X2 |
| 4545 | 6-3/8 | 4-1/2 | 6.13 | 3/4X2 |
| 5040 | 7 | 4 | 6.72 | 7/8 X2 1/4 |
| 5050 | 7 | 5 | 6.72 | 7/8 X2 1/4 |
Detailed Images About UsXIHU (WEST LAKE) DIS. MACHINERY &EQUIPMENT CO.,LTD Our products are produced according to to ISO standard.European & American standards.Our output of pulleys is more than 1 million PCS per year and taper bushes around 1 million PCS per year. Also we can produce various special transmission parts according to the customers` drawings.Our products are very popular in Europe. American.Japan and other countries.The turnover oflast year is over RMB 60 millio. We own efficient and flexible management system, advance equipment and technology,perfect system for quality control. We offer products with good quality and reasonable prices. production process Warehouse
bushing brass
editor by czh
china near me shop V-Belt Pulley Taper Lock Bush 1210 1610 2012 2517 3020 Split Taper Bushing manufacturers
Item Description
Merchandise Description
Taper Bush
one. Taper Lock Bush dimensions as underneath:1008,1108,1210,1215,1310,1610,1615,2012,2517,2525,3571,
3030,3535,4040,4545,5050
2. Materials of Taper Bush: Cast Iron GG22/GG25, Metal C453. Floor treatment: Black-phosphated or original colour without having ending
4. Feature of Taper Bush:*Simple on-easy off*Machined to large specific tolerance
*A entire assortment of the two metric and inch dimensions taper bushes are CZPT
*ISO9001:2008 certificated
Merchandise Parameters
Packaging & CZPT
All the goods can be packed in cartons,or,you can pick the pallet packing.
Produced IN CZPT NA can be pressed on wood cases.Land,air,sea transportation are CZPT .UPS,DHL,TNT,
FedEx and EMS are all supported.
Company Profile
About CZPT CZPT ry
ZheJiang CZPT CZPT ry Co., Ltd., specializes in manufacturing CZPT CZPT Transmission Products. Soon after over thirteen a long time challenging work, CZPT have already get the certification of ISO9001:2000 and turn out to be a holding firm for 3 manufacturing factories.
MIGHTY anvantage
1, Ample experience in the mechanical processing industries.
2,Massive good quality of CZPT material obtain and inventory in warhouse which guarantee the minimal value for the material and production in time.
three,Now have 5 technical employees, we have powerful potential for design and approach layout, and much more than 70 worker now work in CZPT FTY and double change eveyday.
4,Strick good quality handle are apply in the complete prodution. we have incoming inspection,procedure inspection and closing generation inspection which can guarantee the ideal of the goods top quality.
five,Prolonged time cooperate with the CZPT Customer, make us simple to understand the csutomer and manage the export.
FAQ
Q: Are you trading organization or company ?
A: We are factory.
Q: How CZPT is your shipping time?
A: Usually it is 5-ten days if the merchandise are in stock. or it is 15-twenty days if the items are not in stock, it is in accordance to quantity.
Q: Do you provide samples ? is it cost-free or further ?
A: Indeed, we could offer you the sample for totally free charge but do not pay the price of freight.
Q: What is your conditions of payment ?
A: Payment=1000USD, thirty% T/T in CZPT ,equilibrium just before shippment.
If you have any concerns, pls come to feel cost-free to speak to me as underneath:
china manufacturer manufacturer Cost 1008 1108 1210 1215 1310 Taper Lock Bushings for V Belt Pulley manufacturers
Solution Description
Merchandise Description
1) Feature of Taper Bushing:
*Easy on-easy off
*Machined to high precise tolerance
*A full range of both metric and inch sizes taper bushes are available
2) Taper Bushings Specification:
| Bushing No. | Bore |
| 1008 | 10.11.twelve.14.15.sixteen.eighteen.19.20.22.24.twenty five |
| 1108 | 10.eleven.12.14.15.sixteen.eighteen.19.20.22.24.twenty five.28 |
| 1210 1215 | 11.twelve.14.15.16.18.19.20.22.24.twenty five.28.thirty.32 |
| 1310 | fourteen.fifteen.16.eighteen.19.20.22.24.25.28.30.32.35 |
| 1610 1615 | fourteen.fifteen.sixteen.eighteen.19.20.22.24.twenty five.28.30.32.35.38.40.forty two |
| 2012 2017 | 18.19.20.22.24.twenty five.28.thirty.32.35.38.40.forty two.45.48.fifty |
| 2517 2525 | 20.22.24.25.28.30.32.35.38.forty.forty two.forty five.forty eight.fifty.55.60 |
| 3571 3030 | twenty five.28.thirty.32.35.38.forty.forty two.45.forty eight.fifty.55.sixty.65.70.75 |
| 3525 3535 | 35.38.forty.42.45.48.fifty.55.60.sixty five.70.75.eighty.85.ninety |
| 4030 4040 | forty.42.forty five.50.sixty.sixty five.70.75.80.85.90.95.one hundred |
| 4535 4545 | 55.60.sixty five.70.75.80.eighty five.ninety.ninety five.a hundred.one hundred and five.110 |
| 5040 5050 | 60.sixty five.70.seventy five.80.eighty five.90.ninety five.one hundred.a hundred and five.110.a hundred and fifteen.one hundred twenty.one hundred twenty five |
Detailed Pictures
Solid iron taper bushing, phosphated
Carbon steel taper bushing
Every single established individually packed
Large stock in warehouse
Catalogue
Packaging & CZPT
Export wood box
FAQ
Q1: Are you buying and selling company or producer ?
A: We are factory.
Q2: How CZPT is your delivery time and cargo?
1.Sample CZPT -occasions: ten-20 days
two.Creation CZPT -times: 30-45 times following get confirmed.
Q3: What is your rewards?
one. The most competitive value and good quality.
two. Perfect technical engineers give you the greatest assist.
3. CZPT is CZPT .
How does a tapered bushing perform? The tapered portion of the element is driven via a large-energy screw with a mating hub, making it possible for the bushing to be securely fixed to the shaft. The force of the clamp can transmit substantial torque (rotational drive). This layout assures that a effectively mounted sprocket and pulley shaft are aligned with basic positioning.
china supplier Taper Lock Bush 1210 1610 2012 2517 3020 Split Taper Bushing for V-Belt Pulley manufacturers
Merchandise Description
Solution Description
1) Feature of Taper Bushing:
*Easy on-easy off
*Machined to high precise tolerance
*A full range of both metric and inch sizes taper bushes are available
two) Taper Bushings Specification:
| Bushing No. | Bore |
| 1008 | 10.eleven.twelve.14.15.sixteen.eighteen.19.twenty.22.24.twenty five |
| 1108 | ten.11.twelve.fourteen.fifteen.sixteen.eighteen.19.20.22.24.25.28 |
| 1210 1215 | eleven.twelve.14.fifteen.16.eighteen.19.20.22.24.25.28.thirty.32 |
| 1310 | fourteen.fifteen.sixteen.eighteen.19.20.22.24.twenty five.28.30.32.35 |
| 1610 1615 | fourteen.fifteen.sixteen.18.19.twenty.22.24.25.28.thirty.32.35.38.40.42 |
| 2012 2017 | 18.19.20.22.24.twenty five.28.thirty.32.35.38.forty.forty two.45.48.fifty |
| 2517 2525 | twenty.22.24.twenty five.28.30.32.35.38.forty.42.forty five.48.fifty.55.sixty |
| 3571 3030 | 25.28.30.32.35.38.forty.forty two.45.48.fifty.55.60.65.70.75 |
| 3525 3535 | 35.38.40.42.forty five.48.fifty.55.60.sixty five.70.75.eighty.85.90 |
| 4030 4040 | forty.42.forty five.50.60.sixty five.70.75.80.eighty five.90.ninety five.100 |
| 4535 4545 | 55.60.sixty five.70.seventy five.eighty.85.90.ninety five.100.one hundred and five.a hundred and ten |
| 5040 5050 | sixty.sixty five.70.75.eighty.85.90.ninety five.one hundred.one hundred and five.110.one hundred fifteen.one hundred twenty.a hundred twenty five |
In depth Photos
Solid iron taper bushing, phosphated
Carbon metal taper bushing
Every single set independently packed
Huge inventory in warehouse
Catalogue
Packaging & CZPT
Export wood box
FAQ
Q1: Are you trading business or manufacturer ?
A: We are manufacturing facility.
Q2: How CZPT is your shipping and delivery time and cargo?
one.Sample CZPT -moments: ten-twenty times
2.Production CZPT -occasions: thirty-45 times following buy verified.
Q3: What is your advantages?
1. The most aggressive value and good top quality.
two. Excellent technological engineers give you the ideal support.
three. CZPT is CZPT .