Merchandise Description
Deep groove ball bearings are the most commonly utilized bearing type. It has deep, uninterrupted raceway grooves. These raceway grooves have the near osculation with the balls, enabling the bearings to accomodate radical and axial hundreds in equally instructions.
In addition to open up kind bearings, these bearings frequently have steel shields or rubber seals mounted to one or each sides and are pre-lubricated with grease. Also, snap rings are often used on the periphery. As to cages, pressed steel kinds are the most frequent kinds. For big deep groove ball bearings, machined brass cages are employed. CZPT d cages are also utilized for high velocity programs.
Maximum type ball bearings
These bearings are single-row deep groove ball bearings with a filling slot on both the internal and outer rings. They attribute an enhanced radial load rating as they can have much more balls of greater diameter.
Not suitable for applications that include axial loading or higher-pace rotation.
When the bearing is set up, the filling slot on the fastened bearing ring ought to be in a no-load region
N0. | Bore | O.D | Width | Chamfer | Load Ranking | Maximuum Seed | Fat | ||
mm | mm | mm | mm | Dynamic Cr |
Static Cor |
Grease r/min |
Oil r/min |
Kg/pcs | |
604 | 4 | twelve | 4 | .two | .ninety seven | .36 | 36000 | 44000 | .0571 |
605 | five | fourteen | 5 | .two | one.33 | .505 | 32000 | 40000 | .0035 |
606 | six | seventeen | six | .3 | 2.19 | .865 | 30000 | 38000 | .006 |
607 | seven | 19 | six | .three | two.24 | .91 | 28000 | 36000 | .008 |
608 | 8 | 22 | seven | .3 | 3.35 | 1.4 | 26000 | 34000 | .012 |
609 | 9 | 24 | seven | .3 | 3.four | one.forty five | 24000 | 32000 | .014 |
6000 | ten | 26 | eight | .3 | four.55 | one.ninety six | 22000 | 30000 | .019 |
6001 | 12 | 28 | eight | .three | 5.one | two.39 | 19000 | 26000 | .571 |
6002 | fifteen | 32 | 9 | .three | five.6 | 2.eighty three | 18000 | 24000 | .03 |
6003 | seventeen | 35 | ten | .3 | six.eight | 3.35 | 17000 | 22000 | .039 |
6004 | twenty | forty two | twelve | .6 | nine.4 | 5.05 | 15000 | 19000 | .069 |
6005 | 25 | forty seven | twelve | .6 | ten.1 | five.85 | 14000 | 18000 | .08 |
6006 | 30 | fifty five | 13 | .6 | thirteen.two | eight.three | 12000 | 15000 | .116 |
6007 | 35 | sixty two | fourteen | 1. | sixteen | 10.three | 10000 | 14000 | .one hundred fifteen |
6008 | forty | 68 | fifteen | 1. | sixteen.8 | eleven.5 | 8000 | 11000 | .19 |
6200 Series Miniature Deep Groove Ball CZPT
N0. | Bore | O.D | Width | Chamfer | Load Ranking | Maximuum Seed | Bodyweight | ||
mm | mm | mm | mm | Dynamic Cr |
Static Cor |
Grease r/min |
Oil r/min |
Kg/pcs | |
624 | 4 | thirteen | 5 | .two | one.fifteen | .four | 36000 | 45000 | .0032 |
625 | five | 16 | five | .3 | one.seventy six | .680 | 32000 | 40000 | .0050 |
626 | 6 | 19 | six | .3 | 2.34 | .885 | 28000 | 36000 | .0080 |
627 | seven | 22 | 7 | .three | 3.35 | one.400 | 26000 | 34000 | .0130 |
628 | 8 | 24 | 8 | .3 | four.00 | one.590 | 24000 | 32000 | .0170 |
629 | 9 | 26 | 8 | .3 | four.55 | one.960 | 22000 | 30000 | .0190 |
6200 | ten | thirty | nine | .6 | 5.10 | two.390 | 19000 | 26000 | .0300 |
6201 | 12 | 32 | ten | .6 | six.10 | 2.750 | 18000 | 24000 | .0360 |
6202 | 15 | 35 | 11 | .six | 7.seventy five | 3.600 | 17000 | 22000 | .0460 |
6203 | 17 | forty | twelve | .6 | 9.60 | four.600 | 16000 | 20000 | .0650 |
6204 | twenty | 47 | fourteen | 1. | twelve.80 | 6.650 | 14000 | 18000 | .1070 |
6205 | 25 | 52 | fifteen | one. | fourteen.00 | seven.850 | 12000 | 16000 | .1250 |
6206 | thirty | 62 | 16 | 1. | 19.fifty | 11.three hundred | ten thousand | 13000 | .2571 |
6300 Series Miniature Deep Groove Ball CZPT
N0. | Bore | O.D | Width | Chamfer | Load Score | Maximuum Seed | Weight | ||
mm | mm | mm | mm | Dynamic Cr |
Static Cor |
Grease r/min |
Oil r/min |
Kg/pcs | |
6300 | ten | 35 | 11 | .6 | 8.2 | 3.five | 18000 | 24000 | .053 |
6301 | 12 | 37 | 12 | one. | 9.seven | 4.2 | 17000 | 22000 | .06 |
6302 | 15 | forty two | thirteen | one. | 11.four | 5.45 | 16000 | 20000 | .082 |
6303 | 17 | forty seven | 14 | 1. | 13.5 | 6.fifty five | 15000 | 19000 | .one hundred fifteen |
6304 | 20 | 52 | 15 | one.one | 15.nine | 7.nine | 14000 | 17000 | .a hundred and forty four |
Set up 1.1. Thoroughly clean all oil, dirt and paint from shafts, bushing holes, bushing exterior and holes of elements (sprockets, pulleys, and many others.). Insert the bushing into the assembly. 3. Match the sample of holes, not threaded holes (each gap is threaded on 1 aspect only). Insert the socket head cap screws or screws into the 50 percent-threaded holes revealed in the impression underneath. Put in the assembly on the shaft. 4. Convert the torque setting or go over screw* to the advised torque placing in the diagram beneath. Fill any unfilled holes with grease.